Pulse Oximetry

Oximetry is a test to measure how much oxygen is in your blood. Doctors use this test to check your blood's oxygen levels. It's often done with a small sensor on your finger or earlobe.

Procedure

What people who've had Pulse Oximetry report

Every report comes from a Lived member, sent anonymously.

NameHow it went

No reports yet

Add what worked for you with the search bar below

About Pulse Oximetry

Who It's For

Pulse oximetry is a quick, painless way to estimate how much oxygen your blood is carrying, without a needle or blood sample. A small clip, usually on a fingertip, shines light through the skin and measures how much passes through. From that, the device calculates oxygen saturation, shown as SpO2: the percentage of your red blood cells' oxygen-carrying capacity that is actually filled with oxygen. Most devices also show your pulse rate. The test is a routine part of many checkups and hospital stays. It is especially useful for people with conditions that affect breathing or circulation, such as COPD (chronic obstructive pulmonary disease), asthma, COVID-19, heart failure or lung cancer, and it can show whether a lung medicine or a home oxygen setting is doing its job. It is used to monitor people before, during and after surgery, overnight when sleep apnea is a concern, and sometimes while walking or climbing stairs to see whether oxygen falls with effort. It is also used to screen newborns before they leave the hospital for critical congenital heart defects, serious heart problems present at birth. Pulse oximetry gives an estimate. When doctors need an exact oxygen level, or also need to know carbon dioxide and blood acidity, they order an arterial blood gas, a blood test usually drawn from an artery in the wrist.

Before the Procedure

Little preparation is needed. Remove nail polish and artificial nails from the finger being tested, because they can block the light and distort the result. Cold hands and poor circulation also make readings less reliable, so warming the hand first helps. If your care team suggests checking at home, ask when and how often to measure, and follow the device's instructions. For the best reading, sit still with your hand warm, relaxed and held below the level of your heart.

During the Procedure

The sensor clips onto a fingertip, or sometimes an earlobe or toe. In hospitals, a disposable sensor may be taped around a finger, toe or nose instead. The light can make the skin glow red, but nothing pierces the skin and there is no pain. Keep the hand still, since movement can disturb the signal. Within a few seconds the display settles on a steady number for oxygen saturation and another for pulse rate; some devices also show signal strength. A spot check is over in under a minute. For continuous monitoring, such as during surgery, a hospital stay or an overnight sleep study, the sensor simply stays on.

Recovery & Aftercare

There is no recovery time, and you can return to normal activities right away. The result is usually available immediately. For most healthy people, oxygen saturation is between 95% and 100%. Somewhat lower readings can be acceptable for people with lung disease such as COPD, and values tend to run slightly lower for people living at high altitude. Your care team interprets the number alongside your symptoms and may give you a personal target range. If you monitor at home, write down each reading with the date and time so you and your care team can see the trend, and keep track of how you feel as well. Low oxygen does not always cause noticeable symptoms, and symptoms matter even when the number looks reassuring. Unless your care team has given you a different target, contact them if your reading is 92% or lower, and seek immediate medical care if it is 88% or lower. New or worsening shortness of breath, chest pain or tightness, or a racing pulse is a reason to contact the care team promptly, whatever the device shows. Bluish lips, face or nails, or severe difficulty breathing, needs emergency care.

Risks & Complications

The test itself has no known physical risk. Its real limitation is accuracy. A reading can be 2 to 4 percentage points higher or lower than the true oxygen level, and nail polish, cold or poorly circulating fingers, movement, skin thickness and current tobacco use can all affect it. Research has consistently found that pulse oximeters can overestimate oxygen levels in people with darker skin, especially when oxygen is low. That can delay recognition that someone needs treatment. The US Food and Drug Administration (FDA) has warned about this limitation, and in January 2025 it proposed recommendations to improve the accuracy of medical-grade oximeters across skin tones. Devices also differ. A small number of over-the-counter oximeters are cleared by the FDA for medical use, but many sold in stores and online are general wellness or sports products that the FDA has not reviewed for making medical decisions. For all these reasons, a single reading is one piece of information: a falling trend or worsening symptoms deserve attention even when the number seems acceptable, and an arterial blood gas can settle doubt when precision matters. In newborn screening, the test rarely flags a healthy baby, but it does not catch every serious heart defect, so a passed screen does not completely rule one out.

Questions to Ask Your Doctor

  1. 1.What oxygen range is normal for me, and at what reading should I call you?
  2. 2.Would a home pulse oximeter help me, and is there an FDA-cleared model you recommend?
  3. 3.How often should I check, and should I measure at rest, during activity or overnight?
  4. 4.Could my skin tone, circulation or other factors make my readings less reliable, and would a blood gas test be useful?
  5. 5.How would a low reading change my treatment, for example whether I need oxygen?

Last reviewed • Oct 2026

Educational content, not medical advice.