Odontometry

Odontometry is the science of measuring teeth. Dentists use this measurement to check tooth size and shape.

Procedure

What people who've had Odontometry report

Every report comes from a Lived member, sent anonymously.

NameHow it went

No reports yet

Add what worked for you with the search bar below

About Odontometry

Who It's For

Odontometry is the measurement of teeth: how wide, long and thick each tooth is, and how the teeth relate to one another in the dental arch. It is a planning and assessment step rather than a treatment. The measurements are usually taken from a model or digital copy of your teeth, not directly in your mouth. In everyday care, odontometry matters most when planning orthodontic treatment such as braces or clear aligners. The best-known example is the Bolton analysis, which compares the combined widths of the upper teeth with those of the lower teeth as a ratio. If the upper teeth are proportionally too large or too small for the lower ones, the bite may not close neatly even after the teeth are straightened. This kind of tooth-size mismatch is hard to see on an ordinary examination, so measuring it before treatment lets the orthodontist plan for it rather than discover it near the end. Tooth measurements are also used in research and forensic work, for example to help estimate a person's sex from dental remains. That use does not involve a living patient's care.

Before the Procedure

Little preparation is needed. Measurements are made from an impression, a digital scan or, in some cases, X-ray images, and the practice will tell you which they plan to use. If you have had dental X-rays or a 3D scan recently, tell the practice. Existing images can sometimes be used instead of taking new ones, which avoids repeat radiation exposure.

During the Procedure

For a conventional impression, the dentist or orthodontist fills a tray with a soft material (often alginate or a silicone putty) and presses it over your upper or lower teeth until it sets. The impression is later poured in dental stone to make a plaster model, and the teeth are measured on that model with fine calipers. For a digital impression, a small handheld scanner, a wand with a camera at its tip, is moved over your teeth to build a 3D model on a computer. The measurements are then taken in software. In studies comparing the two approaches, people generally preferred the scan. Sometimes measurements come from a cone beam CT (CBCT) scan, a 3D dental X-ray in which a machine rotates around your head for a short time. This is usually done because the image is needed for another reason, such as planning dental implants or examining teeth in unusual positions, rather than for measurement alone.

Recovery & Aftercare

There is no recovery period. You can eat, drink and return to normal activities right away. The measurements are interpreted alongside the rest of your examination, photographs and X-rays. If they show a meaningful mismatch between upper and lower tooth sizes, the orthodontist may plan to slightly narrow some teeth or to build up teeth that are small, so that the teeth fit together better at the end of treatment. Ask how the results change your treatment plan and expected result.

Risks & Complications

Taking an impression or a digital scan is not invasive and uses no radiation. The main limitations concern accuracy and interpretation rather than physical harm. Measurements on digital models are highly repeatable, but they do not always match plaster-model measurements exactly, and different examiners can get slightly different values. The reference values used for comparison, including Bolton's, were developed in particular populations and may not fit every ethnic group equally well. If a cone beam CT scan is used, it delivers more radiation than conventional dental X-rays, although generally less than a medical CT scan. Children and young people are more sensitive to radiation, so the US Food and Drug Administration (FDA) and the American Dental Association advise taking dental X-rays only when they are needed to diagnose or treat a problem, and asking whether an option with less or no radiation would answer the same question.

Questions to Ask Your Doctor

  1. 1.What will these measurements tell you, and how could they change my treatment plan?
  2. 2.Will you use an impression, a digital scan or X-ray images, and why?
  3. 3.If a 3D scan is suggested, is it needed for this, or could existing images or a scan without radiation be used?
  4. 4.If my upper and lower teeth do not match in size, what are the options for correcting it?

Last reviewed • Oct 2026

Educational content, not medical advice.