Fluorophotometry

This is a test that measures how much light comes out of your eye when a special dye is used. Doctors use this test to check how well your eye's barriers are working, like the barrier between your blood and eye fluid.

Procedure

What people who've had Fluorophotometry report

Every report comes from a Lived member, sent anonymously.

NameHow it went

No reports yet

Add what worked for you with the search bar below

About Fluorophotometry

Who It's For

Fluorophotometry is a way of measuring how fluid and other substances move through the eye. A small amount of fluorescein, an orange dye that glows yellow-green under blue light, is placed in the eye or injected into a vein. An instrument mounted on a slit lamp (the microscope used in an ordinary eye exam) then measures how brightly the dye glows in different parts of the eye. Because the amount of dye in each part reflects how fluid enters, moves and drains, the readings give numbers that a photograph cannot. There are three main versions, and they answer different questions. Vitreous fluorophotometry uses dye injected into a vein and measures how much leaks from the blood vessels at the back of the eye into the vitreous, the clear gel that fills the eyeball. This leak tests the blood-retinal barrier, the lining that normally keeps blood components out of the retina. Studies have found more leakage in people with diabetes, and more in eyes with more advanced diabetic retinopathy. Anterior segment fluorophotometry uses eye drops and measures how quickly the dye washes out of the front of the eye, which shows how fast the eye makes aqueous humor, the fluid whose balance sets eye pressure. It is used to learn how glaucoma drops lower pressure. Tear fluorophotometry measures how quickly a drop of dye fades from the tear film, which shows how fast tears are replaced and is used in dry eye research. Fluorophotometry is mainly a research tool. It needs specialized equipment and trained operators, and it is not practical for routine care, so most people who have it are taking part in a study or a drug trial. In everyday eye care, the same questions are usually answered with other tests: fluorescein angiography and optical coherence tomography (OCT, a scan that shows the retina's layers) for leaking retinal vessels, standard eye pressure checks for glaucoma, and simpler tear tests for dry eye.

Before the Procedure

Preparation depends on the version. For tear measurements there is usually little to do beyond following the team's instructions about contact lenses and any eye drops you use. For aqueous flow measurements, you may be asked to put fluorescein drops in your eyes at home several hours before the visit, often the night before. In one study, participants put in several drops about eight hours before the first reading. Tell the team about every eye drop you use: numbing drops and the preservatives in some eye drops can change how readily dye passes through the cornea and can distort the result, so studies usually avoid them on measurement days. For vitreous fluorophotometry, the dye goes into a vein, so the questions resemble those before a fluorescein angiogram. Tell the team if you have ever reacted to fluorescein dye, or if you have allergies, hives, eczema or asthma, because allergic reactions are more common in those groups. Also tell them if you are or might be pregnant, since injected fluorescein is used in pregnancy only when clearly needed, or if you are breastfeeding, because the dye passes into breast milk for up to four days. If the test is part of a research study, you will be asked to give written consent after the study's purpose and risks are explained.

During the Procedure

You sit at the instrument with your chin on a rest and your forehead against a bar, and look at a target while a beam of blue light scans through the eye. The measurement itself does not touch the eye and is not painful. The timing differs by version. A tear measurement takes repeated readings over several minutes as the dye fades, for example once a minute for ten minutes. An aqueous flow measurement repeats the scan at intervals over several hours, because the result comes from how fast the dye clears. For vitreous fluorophotometry, the dye is injected into a vein, usually in the arm, and the eye is scanned afterward, commonly at about 30 and 60 minutes. A blood sample may also be taken so the dye level in the blood can be compared with the level in the eye. Some research protocols repeat the scans over a day or two to follow how the dye moves in and out.

Recovery & Aftercare

After the eye-drop versions, there is little to recover from. The dye may sting briefly, and if it touches the skin it can leave a short-lived stain and can mark clothing. Most people return to their usual activities right away. After an injection of fluorescein, it is common for the skin to look slightly yellow for 6 to 12 hours and for urine to turn bright yellow for 24 to 36 hours. This is the dye leaving the body and is not a sign of harm. Some people feel nauseated or vomit within the first few minutes after the injection, which usually settles within about ten minutes. Because fluorophotometry is mostly done in research, the result may not be shared with you or used to guide your treatment. If you want to know what your result showed and what it means, ask before the test.

Risks & Complications

The eye-drop versions carry very little risk beyond brief stinging. The injected version carries the risks of intravenous fluorescein. Nausea and stomach upset are the most common problems. If the dye leaks out of the vein into the surrounding tissue, it can cause severe pain and damage to the skin and tissue around the injection site, so tell the staff right away if the injection site hurts or burns. Allergic reactions such as hives, itching or wheezing can occur, and severe reactions (anaphylaxis) are rare but have caused deaths. They are more likely in people who have reacted to fluorescein before or who have allergies or asthma, which is why the team asks about them and keeps emergency treatment on hand. The measurement also has limits. Readings can vary considerably from one day to the next in the same person, and the instrument cannot fully separate the signal from the retina and the layer beneath it. A single result therefore means less than it might seem, which is one reason the test has stayed mostly in research rather than routine care.

Questions to Ask Your Doctor

  1. 1.Is this test part of my care or part of a research study, and what question is it meant to answer?
  2. 2.Which version will I have, eye drops or an injection into a vein, and how long will the visit take?
  3. 3.What should I do about my contact lenses and my usual eye drops before the test?
  4. 4.Given my allergies or asthma, what precautions will you take if the dye is injected?
  5. 5.Will I get my result, and would it change anything about my treatment?

Last reviewed • Oct 2026

Educational content, not medical advice.