Corneal Topography

This is a test that measures the shape and curve of the front surface of your eye, called the cornea. It helps doctors understand how your cornea is shaped. This information is important for fitting contact lenses and for diagnosing certain eye conditions, like keratoconus, which can affect your vision.

Procedure

What people who've had Corneal Topography report

Every report comes from a Lived member, sent anonymously.

NameHow it went

No reports yet

Add what worked for you with the search bar below

About Corneal Topography

Who It's For

Corneal topography is a quick, painless imaging test that maps the shape of the cornea, the clear dome at the front of the eye that does most of the work of focusing light. The result is a set of color-coded maps showing where the cornea is steeper or flatter. Small irregularities in that shape can blur vision, and many of them cannot be seen during an ordinary eye exam. Topography is a measurement, not a treatment. The test is a routine part of screening before laser vision correction, such as LASIK or PRK, the two common laser procedures that reshape the cornea to reduce the need for glasses or contact lenses. Its most important job there is to look for early keratoconus, a condition in which the cornea gradually thins and bulges into a cone. Keratoconus can be present before it causes symptoms, and it raises the risk of complications after laser surgery, so finding it can change whether surgery is advisable at all. Topography is also used to diagnose and follow keratoconus over time, to measure astigmatism (an uneven curve of the cornea), to plan cataract surgery, corneal transplant or corneal cross-linking, to check results after eye surgery, to assess scars or growths on the cornea, and to fit contact lenses, especially rigid lenses for irregular corneas. An older, simpler measurement called keratometry reads only a few points in the center of the cornea. Topography maps much more of the surface, which matters when a problem sits off-center or when surgery will reshape the cornea.

Before the Procedure

Most people need no special preparation. The exception is contact lenses. Lenses rest directly on the cornea and can temporarily change its shape, which can make the maps inaccurate. The clinic may ask you to leave your lenses out for a period before the test, typically longer for rigid lenses than for soft ones. Waiting times vary by lens type and by clinic, so follow the instructions you are given, and say so if you could not keep your lenses out as long as asked. Dry eyes can also affect the readings, because some devices measure light reflected off the tear film covering the cornea. Mention dry eye or any eye drops you use.

During the Procedure

You sit in front of the instrument and rest your chin and forehead on a support. You look at a light or target inside the device while it captures images of each eye. Many devices project a pattern of illuminated rings onto the cornea and analyze how the reflection is distorted. The device does not touch your eye, and the test is painless. The imaging itself takes a few minutes, though a visit that includes other tests takes longer. The classic ring-based instruments map only the front surface of the cornea. Related devices, often grouped under the name corneal tomography, use a scanning slit of light or a rotating camera to image the back surface as well and measure corneal thickness. Clinics often use both kinds of information, particularly when screening for keratoconus before surgery.

Recovery & Aftercare

There is no recovery period. The test does not require dilating drops, so it does not by itself blur your vision or prevent driving. If the same appointment includes a dilated eye exam or other tests, follow the advice given for those. The eye doctor interprets the maps, often by showing you the colors: on the most common map, warm colors such as red and orange mark steeper areas and cool colors such as blue and green mark flatter ones. What the results mean depends on why the test was done. They may confirm that you are a suitable candidate for refractive surgery, set a baseline for watching keratoconus over time, or guide a lens fitting or surgical plan. Repeat scans are common when a condition needs monitoring. New or worsening vision symptoms between visits are worth reporting to your eye care team.

Risks & Complications

Corneal topography has no known physical risks and is painless, because nothing touches the eye. The practical limitation is accuracy. Recent contact lens wear, an unstable tear film from dry eye, or difficulty keeping the eye still on the target can distort the measurements, and the test may need to be repeated. A single scan also cannot settle every question: decisions about surgery or a keratoconus diagnosis usually draw on several measurements and the full eye exam.

Questions to Ask Your Doctor

  1. 1.What are you looking for with this test, and how will the results change my care?
  2. 2.How long should I keep my contact lenses out beforehand, and what happens if I cannot?
  3. 3.Do my maps show anything that would affect whether laser vision correction is safe for me?
  4. 4.Will I also have tomography or corneal thickness measurements, and why?
  5. 5.How often should the test be repeated to monitor my condition?

Last reviewed • Oct 2026

Educational content, not medical advice.