Corneal Thickness Test

This is a test to measure how thick the cornea is. Doctors use this measurement to help diagnose certain eye conditions and plan treatments.

Procedure

What people who've had Corneal Thickness Test report

Every report comes from a Lived member, sent anonymously.

NameHow it went

No reports yet

Add what worked for you with the search bar below

About Corneal Thickness Test

Who It's For

A corneal thickness test, also called pachymetry, measures how thick the cornea is. The cornea is the clear, dome-shaped tissue at the front of the eye that helps focus light and protects the inside of the eye. The measurement takes seconds and is usually one part of a broader eye exam rather than a visit of its own. Its most common use is in checking for glaucoma, a disease that damages the optic nerve, often in connection with raised pressure inside the eye. The standard pressure test presses against the cornea, so the cornea's thickness affects the reading. A thinner cornea tends to make eye pressure read lower than it really is, and a thicker cornea tends to make it read higher. Knowing the thickness helps an eye doctor decide whether a pressure number is truly high or normal. Corneal thickness also matters on its own: in a large US study of people with high eye pressure, those with thinner corneas were more likely to go on to develop glaucoma. The test is also routine before laser vision correction such as LASIK (laser-assisted in situ keratomileusis), which corrects focusing by reshaping and removing corneal tissue. The surgeon needs to know enough tissue will remain afterward, because a cornea left too thin can weaken and bulge forward, a complication called ectasia. Eye doctors also use pachymetry to diagnose and follow corneal conditions such as keratoconus, in which the cornea thins and changes shape, and Fuchs' dystrophy, in which the cornea swells with fluid, as well as after some eye injuries.

Before the Procedure

Most people need no special preparation. Optical pachymetry, which does not touch the eye, requires nothing in advance. If ultrasound pachymetry is planned, it starts with numbing eye drops, and it often happens during an exam that may also include drops to widen the pupils. Those drops can blur vision for a while, so it is reasonable to ask the office beforehand whether dilation is planned and whether you should bring a driver. Tell the team if you have reacted badly to eye drops before.

During the Procedure

There are two main ways to measure corneal thickness, and they feel quite different. With optical pachymetry, you sit at a machine and rest your chin and forehead against a support while you look at a target light. The device uses light-based imaging, such as optical coherence tomography (a scan that builds a cross-section of the eye from reflected light), to measure the cornea. Nothing touches the eye. With ultrasound pachymetry, the clinician first puts numbing drops in the eye, which may sting briefly. A small sterilized handheld probe is then touched lightly to the center of the cornea for a few seconds while you look straight ahead, and it uses sound waves to measure thickness. The clinician may also take readings from other parts of the cornea. You may notice light contact but should not feel pain. Either method usually takes a few readings per eye and reports an average, and the measurement of both eyes takes only about a minute.

Recovery & Aftercare

There is no recovery period, and you can go back to normal activities right away. After optical pachymetry there are no after-effects. After ultrasound pachymetry, the numbing drops can leave the eye slightly watery, red or blurry for a short time. While the eye is numb you cannot feel minor injuries, so avoid touching or rubbing it until feeling returns, which typically takes about 10 to 20 minutes. Results are available immediately, and the eye doctor can usually explain them at the same visit. Thickness is reported in micrometers (thousandths of a millimeter). In the US, a typical central corneal thickness is roughly 540 to 550 micrometers, but healthy eyes can measure outside that range. The number means little by itself: it is read together with eye pressure, the appearance of the optic nerve, your age and the reason for testing. Different machines can give results that differ by a meaningful amount, so it helps when repeat measurements are compared on the same type of device. If your vision is not back to normal after the exam, or the eye stays painful or irritated once the numbness has worn off, contact your eye care provider.

Risks & Complications

Optical pachymetry has no known risks because nothing touches the eye. Ultrasound pachymetry is very low risk. The numbing drops can sting, burn or redden the eye briefly. Because the probe touches the cornea, there is a small chance of a minor scratch to the surface or of infection, and these usually heal without lasting effect. Rubbing a numb eye is the most avoidable cause of a scratch. The more practical limitation is interpretation. A single thickness reading cannot diagnose glaucoma or rule it out, and readings vary between devices. A thin cornea is a reason for closer attention to eye pressure, not a diagnosis in itself.

Questions to Ask Your Doctor

  1. 1.Why are you measuring my corneal thickness, and how will the result change what you recommend?
  2. 2.Will you use the ultrasound probe or an optical scan, and will I also have drops that blur my vision?
  3. 3.How does my corneal thickness affect how you read my eye pressure and my glaucoma risk?
  4. 4.If I am considering LASIK, is my cornea thick enough, and would another procedure suit me better?
  5. 5.Should this measurement be repeated, and on the same machine, to track changes over time?

Last reviewed • Oct 2026

Educational content, not medical advice.