Chemical Burns

Chemical burns are a type of burn caused by contact with strong chemicals. These chemicals can be acids or bases. When they touch your skin, they can cause tissue damage, ranging from mild irritation to severe burns. It's important to get medical help right away if you think you've had a chemical burn.

Condition

What people with Chemical Burns report

Every report comes from a Lived member, sent anonymously.

Have you tried Silvadene (Silver Sulfadiazine) for Chemical Burns?

NameHow it went

About Chemical Burns

What It Is

A chemical burn is damage to the skin, eyes or other tissue caused by contact with a corrosive substance, most often a strong acid or a strong alkali (also called a base). Instead of heat, the chemical itself breaks down the tissue it touches. The burned area may be red, painful, blistered, or in deeper injuries pale, dark or leathery. What sets chemical burns apart from burns caused by heat is that the damage continues for as long as the chemical stays in contact with the tissue. That is why removing the chemical and rinsing it away quickly matters so much. It also means a chemical burn can be deeper than it first looks: some chemicals cause little pain or visible change at first and reveal the full extent of the injury hours later. A chemical splashed in the eye is a particular concern because it can damage the clear front surface of the eye (the cornea) and affect vision.

Causes & Risk Factors

Chemical burns happen at home, at work and outdoors. Common sources include drain and oven cleaners, toilet bowl cleaners, bleach, battery acid, rust removers, paint thinners and removers, hair relaxers, pool chemicals, fertilizers, pesticides and wet cement. In children, most chemical burns come from household products reached by accident. In adults, many happen at work, for example in construction, cleaning, manufacturing or laboratories. How badly a chemical burns depends on what it is, how concentrated it is, how much touches the skin and, above all, how long it stays there. Alkalis such as lye, drain and oven cleaners and wet cement usually do more damage than acids because they dissolve tissue and keep penetrating deeper, while most acids form a tough crust that tends to limit how far they spread. Wet cement burns are often noticed late: the cement may cause only mild irritation at first, so people may keep kneeling or standing in it and find a deep burn later. A few chemicals behave differently. Hydrofluoric acid, used in rust removers, glass etching and industrial cleaning, can seep deep into tissue and bind the calcium and magnesium in the body, which can cause severe pain and dangerous drops in blood calcium that disturb the heart's rhythm. Low-strength products may cause no pain at first, with symptoms delayed for many hours. Solvents such as phenol and petroleum products can be absorbed through the skin and affect organs such as the kidneys and liver.

How It's Diagnosed

A chemical burn is diagnosed by examining the injury and finding out exactly what the chemical was. The product name, its label or a workplace safety data sheet is one of the most useful things to bring, because the treatment for some chemicals differs from the general approach. Clinicians may test the pH (how acidic or alkaline it is) of the skin surface with test strips to check whether rinsing has removed the chemical, and keep rinsing if it has not. The clinician then judges how deep the burn goes and how much of the body it covers. A superficial burn is red and painful, like a sunburn. A partial-thickness burn goes into the deeper skin layer and is moist, blistered and very painful, or paler and less painful when deeper. A full-thickness burn destroys the whole skin, looks dry and leathery (white, brown or black) and may feel numb. With chemical burns, depth can be hard to judge at first and may become clearer over the following days, and even small burns can be deeper than they look. Because chemical burns can be deceptive, the American Burn Association advises clinicians to consult a burn center about all chemical injuries. Exposure to certain chemicals, especially hydrofluoric acid, also calls for blood tests of calcium, magnesium and potassium and heart rhythm monitoring. A chemical in the eye is assessed by an eye specialist.

Treatment Options

Treatment begins with first aid, and the first minutes make a real difference. Remove contaminated clothing and jewelry without spreading the chemical, and avoid getting it on yourself. If the chemical is a dry powder, brush it off first. Then rinse the skin with cool running water for at least 15 minutes. Strong chemicals, especially alkalis, usually need longer rinsing, and hospitals often continue for 30 minutes or more. Evidence from burn studies suggests that starting to rinse early may reduce scarring and time in hospital. Afterward, cover the area loosely with a clean, dry dressing or cloth. Two cautions matter. Do not try to neutralize the chemical, for example by putting baking soda on an acid or vinegar on an alkali, because the reaction can generate heat and deepen the burn. And do not put ointments, butter or other home remedies on the burn. A few substances are exceptions to rinsing with water right away: dry lime (quicklime) should be brushed off, and reactive metals such as sodium, potassium, lithium and magnesium react with water and are removed by trained staff before any rinsing. Medical care after decontamination resembles care for other burns. Minor chemical burns often heal on their own with simple wound care. Larger or deeper burns are cleaned and dressed with antibiotic ointment and sterile dressings, checked regularly, and may need surgery to remove dead tissue and a skin graft (healthy skin moved from another part of the body) to close the wound. For deep burns, early surgery shortens recovery and reduces thick scarring. Hydrofluoric acid needs specific treatment beyond water. After rinsing, a calcium gluconate gel is rubbed into the skin to bind the fluoride, and severe cases may need calcium injected into the tissue or given through a vein, along with blood tests and heart monitoring while the risk lasts. Chemical injuries to the eye are flushed thoroughly and then treated by an eye specialist, sometimes with surgery for severe damage.

What to Expect

Recovery depends mainly on the chemical, how long it stayed on the skin and how deep the burn went. Minor chemical burns often heal without treatment beyond basic wound care. Deeper burns take longer, may need surgery and skin grafts, and can leave thick scars. Severe burns can have lasting effects on appearance and on how a hand, joint or other area works, which is part of why burn specialists are often involved. Because the depth of a chemical burn can become clearer over several days, follow-up matters even when the injury looked minor at first. Deeper burns are rechecked regularly, often daily in hospital, so dressings can be changed and the team can decide whether surgery is needed. Outcomes after eye injuries vary widely. Many acid burns to the eye recover well. Alkali burns are more likely to cause lasting damage to the cornea and vision, and some people need long-term eye care or later surgery. After any chemical injury, it is worth reviewing how it happened, such as storage at home or protective equipment at work, to prevent another one.

When to Seek Help

Call 911 if someone exposed to a chemical has trouble breathing, has a seizure, is unconscious or shows signs of shock, such as feeling faint, looking pale or breathing fast and shallowly. A chemical in the eye is an emergency: flush the eye with clean running water for at least 15 minutes, holding the eyelid open, and get emergency medical care without delay. Any skin contact with hydrofluoric acid also needs emergency care after rinsing, even if it looks minor or does not hurt yet. If someone has swallowed or breathed in a dangerous chemical and has none of the emergency signs above, call Poison Control at 1-800-222-1222 for advice right away. Go to an emergency department right away if someone without those emergency signs seems unwell overall after the exposure. This can be a sign of a chemical affecting the whole body, which needs hospital monitoring. A young child with any chemical burn also needs to be seen right away, preferably at an emergency department. After rinsing, get in-person medical care right away, at an emergency department or urgent care rather than a later appointment, for a burn that blisters, looks deep, white or leathery, covers more than a small area, or involves the face, hands, feet, genitals or a joint. Even a small burn deserves a check if you are unsure what the chemical was. During healing, contact the care team if the wound is not improving as expected.

Questions to Ask Your Doctor

  1. 1.How deep is this burn, and could it turn out to be deeper over the next few days?
  2. 2.Is this a chemical that needs any treatment or monitoring beyond rinsing?
  3. 3.Will this burn heal on its own, or might it need surgery or a skin graft?
  4. 4.What can I do to reduce scarring and keep full movement in the area?
  5. 5.How should I care for the wound at home, and when should it be checked again?

Last reviewed • Oct 2026

Educational content, not medical advice.