Transcutaneous Blood Gas Monitoring

This test checks the levels of oxygen and carbon dioxide in your blood. It's done by placing sensors on your skin, so you don't need a needle. It helps doctors understand how well your lungs and heart are working.

Procedure

What people who've had Transcutaneous Blood Gas Monitoring report

Every report comes from a Lived member, sent anonymously.

NameHow it went

No reports yet

Add what worked for you with the search bar below

About Transcutaneous Blood Gas Monitoring

Who It's For

Transcutaneous blood gas monitoring uses a small sensor on the skin to estimate how much carbon dioxide or oxygen is in the blood, without a needle. The sensor gently warms a patch of skin, which increases blood flow just beneath it and lets these gases pass through the skin to be measured. Unlike a single blood draw, it can run continuously for hours. The test comes in two main forms that answer different questions. Transcutaneous carbon dioxide monitoring (often written PtcCO2) shows how well a person is clearing carbon dioxide by breathing. It is used in intensive care, during anesthesia and some airway procedures, in newborn intensive care and in sleep studies. In healthy adults, carbon dioxide pressure in arterial blood usually sits between 35 and 45 mmHg (millimeters of mercury); values that stay above that range point to breathing that is too shallow or too slow. People whose breathing muscles are weakening, such as those with amyotrophic lateral sclerosis (ALS) or other neuromuscular diseases, may be monitored overnight, because underbreathing during sleep is often the earliest sign of trouble and can appear while daytime breathing tests still look acceptable. Transcutaneous oxygen measurement (TcPO2) is used mostly on the feet and legs to judge whether tissue is getting enough blood to heal, for example around a diabetic foot ulcer or after part of the foot has been amputated. Here a higher number is better. In people with diabetes and a foot ulcer, readings below about 25 mmHg are linked with a lower chance of healing and a higher chance of amputation, and guidelines advise urgent referral to a vascular specialist when the reading is below 30 mmHg. Guidelines treat it as an option when simpler toe blood pressure measurements cannot be done. The main alternative for carbon dioxide is an arterial blood gas, a blood sample usually drawn from an artery at the wrist. It remains the most accurate measure, but it captures a single moment and requires a needle. Pulse oximetry, the clip on a finger, is cheaper and simpler, but it measures oxygen saturation and says nothing about carbon dioxide.

Before the Procedure

Preparation is usually simple and depends on the setting. In intensive care or during surgery, the sensor is added alongside the other monitors with no special steps for the patient. For a planned test, such as an overnight sleep study or a limb oxygen test in a vascular or wound clinic, the team gives instructions in advance. Practice varies, so follow the lab's specific guidance about smoking, caffeine and any oxygen you use beforehand. Tell the team about swelling in your legs or feet, skin conditions or fragile skin where sensors are likely to go, since thick or swollen skin can make readings unreliable and fragile skin is more easily irritated by heat. For a foot or leg test, wear clothing that makes your lower legs easy to reach.

During the Procedure

The sensor is attached to the skin with an adhesive ring. For carbon dioxide monitoring the earlobe is a common choice, because readings there tend to agree best with arterial blood; other sites can be used. For a limb oxygen test, sensors are placed at several points on the foot or leg. The sensor heats the skin to roughly 40 to 44°C (about 104 to 111°F), which most people feel as mild warmth. Readings take about 20 minutes to settle after the sensor goes on, so the measurement is not instant, and lying still helps. There are no needles and the measurement itself is painless. Continuous monitoring can last through a procedure, a hospital stay or a full night of sleep, with the sensor moved to a fresh spot from time to time. During an overnight sleep study it is one of several sensors. If a reading looks unexpected or sits near a treatment threshold, the team may draw an arterial blood sample to check it.

Recovery & Aftercare

There is no recovery period from the test itself, and you can return to normal activity right away. The warmed skin may look pink for a while after the sensor comes off. A blister, a sore or redness that does not fade suggests a burn and is worth showing to the care team. What happens next depends on why the test was done. In the hospital, readings guide decisions in real time, such as adjusting ventilator settings. After a sleep study, the team looks at how much of the night carbon dioxide stayed above the normal range; this can lead to starting or adjusting noninvasive ventilation, a machine that supports breathing through a mask during sleep. In ALS there is no agreed cutoff, so the result is weighed together with other breathing tests rather than used alone. After a limb oxygen test, the result feeds into decisions about wound care, imaging of the arteries or a procedure to restore blood flow.

Risks & Complications

The test is low risk. The main physical hazard is a burn from the heated sensor, which is more likely in newborns, whose skin is thin and delicate, and during long monitoring. That is why staff rotate the sensor site and check the skin underneath. Some people also find the warmth uncomfortable. The more important limitation is accuracy. The reading is an estimate of what is in the blood, not a direct measurement. Across many studies, carbon dioxide readings match arterial blood well on average, but an individual reading can differ by as much as 15 mmHg, with closer agreement when the sensor is on the earlobe. Thick or swollen skin, poor blood flow at the site and slow drift over a long recording can all distort results. For this reason, a value that would change treatment is often confirmed with an arterial blood gas. The evidence behind some uses is also limited. For newborns, no trials have shown whether routine continuous carbon dioxide monitoring improves survival or longer-term outcomes. For foot wounds, the studies linking oxygen readings to healing are of low quality and use different cutoffs, so the result is one input among several.

Questions to Ask Your Doctor

  1. 1.Is this test measuring carbon dioxide, oxygen or both, and what question will it answer in my case?
  2. 2.Will an important result be checked against an arterial blood sample before any treatment decision?
  3. 3.If this is part of a sleep study, what carbon dioxide levels would lead you to recommend breathing support at night?
  4. 4.If this is for a foot or leg wound, how will the result change my wound care or the need for a procedure to improve blood flow?
  5. 5.Should I avoid smoking, caffeine or my usual oxygen before the test, and for how long?

Last reviewed • Oct 2026

Educational content, not medical advice.